PROPERTIES: DISPERLITH Elastic special water-based dispersion paint, formulated with modified acrylates copolymers, low emissions and low odour (Low Voc), free of APEO, ammonium, formaldehyde and heavy metals, highly resistant to dampness and humidity, for interior and exterior use. DISPERLITH Elastic forms a well-balanced and elastic film of paint, with a satin finish, that is easy to clean and disinfect, easy to apply and, quick drying, also at low temperatures, from 3ºC, with low odour and providing an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistance Class 1, covering Class 1 (>250 ml/m²), highly impermeable to water vapour, Class 3 (SD = 1.57), and water permeability Class 1 (W = 0.03). It could be applied at temperatures of 3ºC or over and up to a maximum relative humidity of 75%. DISPERLITH Elastic is a paint with (EC) UNE-EN 1504-2:2005 marking and that is highly resistant to Class 1 and 2 aggressive chemical attack, with testing of the food simulants, along with the usual cleaning and disinfecting agents in their maximum recommended solutions, TECNALIA Report 050844 and Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department). Available in white and other colours.
BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH Elastic is an intelligent sanitary paint, treated with BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus, Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints of the DISPERLITH range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP (EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement of Compliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.
RECOMMENDED USE: DISPERLITH Elastic is designed for interior and exterior use, and is compatible with most surfaces, duly primed should, such be required, and to cover well-adhered previous coats of dispersion or priming paints, resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Its excellent covering and water-vapour barrier qualities mean that it functions as an excellent waterproofing film, particularly in severe industrial, climate or sanitary conditions, for the food industry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering (for contact with foods in open areas use the version DISPERLITH Foodgrade Elastic).
HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place at ambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. Following adequate preparation of the surface DISPERLITH Elastic should be applied undiluted, in two coats, using brushes, rollers or airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required, duly primed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions, of around 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensils immediately after use with water. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.
AVERAGE YIELD: DISPERLITH Elastic has a yield of approx. 3-5 m²/l, applied in two hands although this can vary considerably, depending on how it is applied and the texture and absorption of the surface.
Envase de 5 y 12,5 litros