Products

by Fakolith Chemical Systems

DISPERLITH INDUSTRY

Breathable hygienic paint, high resistance to dampness and its consequences. Treated with BioFilmStop technology against molds, bacteria and biofilm. Suitable for food industry, health sector, industry in general and in buildings with moisture and microorganism problems.

Product description

PROPERTIES: DISPERLITH Industry special water-based dispersion paint, formulated with 100% pure acrylates, low emissions and low odour (Low Voc), free of APEO, ammonium, formaldehyde and heavy metals, highly resistant to dampness/humidity, for interior and exterior use. DISPERLITH Industry forms a well-balanced film of paint that is easy to apply, quick drying, low odour and provides an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistance Class 1, covering Class 1 (250 ml/m²), water vapour transpiration Class 2 (SD = 0.27), and water permeability Class 3 (W = 0.08). Excellent adhesion on surfaces of all kinds, (direct tensile adhesion on glazed tiles 80-100 kg/cm² UNE-EN ISO 4624-2002, Cross-cut test Class 1 UNE-EN ISO 2409:2007. Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i. Highly resistant to surface carbonation and alkalinity. It could be applied at temperatures of 5ºC or over and up to a maximum relative humidity of 75%. Available in white and other colours.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH INDUSTRY is an intelligent sanitary paint, treated with BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus, Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints of the DISPERLITH range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP (EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement of Compliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: DISPERLITH Industry is mainly recommended for ceilings and walls, interior or exterior, and is compatible with most surfaces, duly primed, should such be required, and to cover well-adhered previous coats of dispersion or priming paints, resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Particularly in severe industrial, climate or sanitary conditions, for the food industry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place at ambient and surface temperatures as low as 5ºC and up to a maximum relative humidity of 75%. Following adequate preparation of the surface DISPERLITH Industry should be applied undiluted, in two coats, using brushes, rollers or airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required, duly primed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions, of around 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensils immediately after use with water. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.

AVERAGE YIELD: DISPERLITH Industry has a yield of approx. 4-5 m²/l, applied in two hands although this can vary considerably, depending on how it is applied and the texture and absorption of the surface.

Back to list