FEATURES: Varnipack FoodGrade is a colourless, thin-layer, air-drying, 1-component aqueous dispersion varnish, certified and suitable for direct and indirect contact with food according to European Regulation EU 10/2011 and American Regulation FDA 21 CFR 175.300 and its subsequent amendments. Food contact varnish with glossy-satin finish, formulated with modified acrylic copolymers, free of Bisphenol A (BPA free), APEO, formaldehyde, phthalates, heavy metals... Varnipack FoodGrade is fast drying, high resistance to humidity, excellent transfer, ideal balance between resistance and flexibility, no tacking or blocking after curing, wet scrub resistance class 1, low Voc, very low odour, barrier function, and excellent finish when is applied in thin layers. It is not a dangerous good for use, for transport by road, sea or air.
Product treated (BPR Art 3 and 58) with BioFilmStop FG antimicrobial technology, specific FoodGrade version, highly effectiveness tested against bacteria and other pathogenic microorganisms such as coronavirus, and always according to EU 10/2011 and FDA 21 CFR 175.300 regulations. ISO 22196 and ISO 21702 effectiveness test (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudomonas aureginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pnemophila, Coronavirus Feline). The paints and coatings of the Fakolith FoodGrade range contribute to the positive compliance with CE 852/2004, are manufactured under HACCP and Good Manufacturing Practices (GMP) according to CE 2023/2006 and/or FDA 21 CFR 174.5, improving the hygiene, food and health safety of surfaces and environments.
FIELDS OF USE: Varnipack FoodGrade is especially indicated for the protection and varnishing of surfaces of up to medium physical-chemical stress, in direct, indirect or occasional contact with food, both in single-use and repeated packaging, especially in the sector of MDF printed food packaging, cardboard, labels, wood, derivatives and others. Also used in the exterior part of wine and liquors barrels and in wooden surfaces such as shelves for curing or displaying foodstuffs and other compatible surfaces. To mark and protect non-edible food barks and peels, 3D printed parts. Mainly used in the printed food packaging sector, also in health care sectors... hospitals, clinics, in industry, civil works, public and private buildings in general.
APPLICABLE by brush, roller, airless or air-mix, anilox rollers in the flexographic industry, industrial spraying. Always apply thin coats.
DRYING: air drying, or forced drying with hot air, IR infrared lamps or equivalent systems that increase temperature.
With Declaration of Compliance.
PERFORMANCE: Depending on the situation, type of base and subsequent use, we recommend between 12.5 ml. and 100 ml, applied in thin layers.
Product for professional use. For a correct application follow the instructions in the technical sheets, application guides and safety data sheets. In case of doubt, consult our technical service.
Cans of 1 and 10 l. - 1000 l. IBC